About Zest-it® Brushable Wax Resist
Zest-it® Brushable Wax Resist is used for masking out areas, like you would use masking fluid.
It is creamy enough to be brushed onto a surface and can be thinned further with Cold Wax Solvent.
|The Zest-it Brushable Wax resist is non-toxic, non-flammable, it is a creamy white colour and made from renewable source Beeswax and Gum Damar. It has a very mild resinous, citrus, waxy smell.
The Brushable Wax Resist can be applied with a brush, sponge or shaper. If thinned with Wax Solvent, a dip pen or ruling pen.
Do not use heat as this can cause the beeswax to give off fumes that can be irritating to the eyes and nose. It will also cause the wax to soak into the surface and become less functional. It is best allowed to dry then 'buffed' with a soft cloth giving subtle contrast to the watercolour surface.
The Brushable Wax Resist can be thinned further with the Cold Wax Solvent, do not make too watery as this will affect the stability of the product.
Have 'safety sense' when using any solvent. Use in a ventilated area, away from sparks and flames, do not heat the product. Keep away from children, do not eat, drink or smoke when using the product (no water bottles in the same area!).
Dispose of the any 'wax/paint sludge' by putting onto damp sand or soil in a container.
Please visit our Wax focused site at www.artywax.co.uk for more information on using Wax Painting Mediums.
|Yes Yes Yes
Back to Products
Copyright 1999 - 2023 © J. & T. Blackman Ltd. All Rights Reserved Worldwide.
The information contained herein is the Intellectual Property of Jacqui Blackman and
J. & T. Blackman Ltd., and is supplied without liability for errors or omissions.
Zest-it ® and its logo are Registered Trademarks.
No part may be reproduced or used except as authorized by contract or other written permission, unless stated otherwise.
The copyright and the foregoing restriction on reproduction and use extend to all media in which the information may be embodied.